Application-engineered OTR tyre supplyInfo@jabiltyre.com
JABIL OTR TYRERequest a quote

Grader · Bias

G-2/L-2 Grader Tyre

G2/L2 Grader Tyre range for motor grader and road construction applications. Selection must be confirmed against load, speed, duty cycle and site conditions.

Last reviewed: October 2026

G-2/L-22 sizes4 configurations

Series overview

G-2/L-2 Grader Tyre application and fit

This bias OTR tyre range is catalogued for motor-grader road construction and maintenance. The current range focuses on motor-grader traction and road-construction applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.

What the G-2/L-2 designation tells buyers

The G-2/L-2 designation places the pattern in the grader and loader application family. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.

Operating conditions to confirm

For this range, document graded surfaces, loose material and mixed construction roads. JABIL uses those inputs to confirm steering position, traction demand, working speed and surface condition. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.

Technical data

G-2/L-2 Grader Tyre available configurations

TBC means the value is not present in the current source catalogue and must be verified before quotation. Load and pressure values are shown only at their stated speeds and must not be interchanged.

SizePRStandard rimOD mmWidth mmLoad 10 km/h kgLoad 50 km/h kgPressure 10 km/h kPa40HQ pcs
13.00-24128TBC30065903080460130
13.00-24148TBC35071003650490TBC
14.00-24128135033571003875675122
14.00-24168135036075004000750TBC

Catalogue evidence

Verified range data for G-2/L-2

These statements use only the published product dataset; final machine fitment still requires technical confirmation.

RANGE IDENTITY

Construction and scope

G-2/L-2 is listed as a bias G-2/L-2 range with 2 sizes and 4 recorded configurations.

APPLICATION DATA

Equipment context

The catalogue associates this range with Motor grader, Road construction. Its current site filters place it under construction, earthmoving conditions.

REPRESENTATIVE DATA

Recorded configurations

13.00-24: 12 PR, rim 8, 300 mm section width. 14.00-24: 16 PR, rim 8, 1350 mm overall diameter, 360 mm section width.

Buyer questions

Frequently asked questions about G-2/L-2 Grader Tyre

What equipment is the G-2/L-2 Grader Tyre intended for?

The catalogue associates this tyre with Motor grader and Road construction. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.

Which sizes are listed for the G-2/L-2 Grader Tyre?

The current catalogue lists 13.00-24, 14.00-24. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.

What does G-2/L-2 mean on this page?

G-2/L-2 places the pattern in the grader and loader application family. It is a starting point; it does not replace machine and duty-cycle verification.

What information is needed to request a quotation?

Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.

Application check

Need this pattern for a specific machine?

Send operating data