Grader · Radial
Radial E3/L3/G3 Grader & Loader Tyre
Radial E3/L3/G3 tyre for graders and loaders operating on muddy, soft and slippery construction roads.
Series overview
Radial E3/L3/G3 Grader & Loader Tyre application and fit
This radial OTR tyre range is catalogued for motor-grader road construction and maintenance. The current range focuses on grader applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.
What the E3/L3/G3 designation tells buyers
The E3/L3/G3 designation places the pattern in the grader and loader application family. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.
Operating conditions to confirm
For this range, document graded surfaces, loose material and mixed construction roads. JABIL uses those inputs to confirm steering position, traction demand, working speed and surface condition. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.
Technical data
Radial E3/L3/G3 Grader & Loader Tyre available configurations
Blank values require technical confirmation. Load and pressure values are shown at their stated speeds and must not be interchanged.
| Size | Star rating | Type | TRA code | Standard rim | Tread depth mm | Load index | Width mm | OD mm | Max load / pressure by speed |
|---|---|---|---|---|---|---|---|---|---|
| 23.5R25 | ★★ | TT/TL | E-3/L-3 G-3 | 19.50/2.5 | 32 | 185B/201A2 | 597 | 1617 | 50 km/h: 9250 kg / 525 kPa; 10 km/h: 14500 kg / 650 kPa |
Buyer questions
Frequently asked questions about Radial E3/L3/G3 Grader & Loader Tyre
What equipment is the Radial E3/L3/G3 Grader & Loader Tyre intended for?
The catalogue associates this tyre with Motor grader and Loader and Construction equipment. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.
Which sizes are listed for the Radial E3/L3/G3 Grader & Loader Tyre?
The current catalogue lists 23.5R25. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.
What does E3/L3/G3 mean on this page?
E3/L3/G3 places the pattern in the grader and loader application family. It is a starting point; it does not replace machine and duty-cycle verification.
What information is needed to request a quotation?
Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.
For a worked example of the data required before quotation, read the 29.5-25 mining tyre selection guide →
Continue the comparison
Related tyres and application records
Application check