Construction and scope
G-3/L-3 is listed as a radial G-3/L-3 range with 2 sizes and 4 recorded configurations.
Earthmoving · Radial
Radial G-3/L-3 block tread with multiple groove edges for snow removal, mining and earthmoving work.
Last reviewed: October 2026

Series overview
This radial OTR tyre range is catalogued for earthmoving and special off-road duty. The current range focuses on earthmoving applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.
The G-3/L-3 designation identifies the L3-G9 catalogue tread family. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.
For this range, document mixed site surfaces and the machine's actual travel cycle. JABIL uses those inputs to verify machine fitment, position, load, speed and surface before selection. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.
Technical data
TBC means the value is not present in the current source catalogue and must be verified before quotation. Load and pressure values are shown only at their stated speeds and must not be interchanged.
| Size | Star rating | Type | TRA code | Standard rim | Tread depth mm | Load index | Width mm | OD mm | Max load / pressure by speed |
|---|---|---|---|---|---|---|---|---|---|
| 17.5R25 | ★★ | TL | G-3/L-3 | 14.00/1.5 | 28 | 153A8 | 445 | 1348 | 40 km/h: 3650 kg / 300 kPa |
| 17.5R25 | ★★ | TL | G-3/L-3 | 14.00/1.5 | 28 | 182A2 | 445 | 1348 | 10 km/h: 8500 kg / 650 kPa |
| 20.5R25 | ★★ | TL | G-3/L-3 | 17.00/2.0 | 31 | 161A8 | 521 | 1493 | 40 km/h: 4625 kg / 300 kPa |
| 20.5R25 | ★★ | TL | G-3/L-3 | 17.00/2.0 | 31 | 193A2 | 521 | 1493 | 10 km/h: 11500 kg / 650 kPa |
Catalogue evidence
These statements use only the published product dataset; final machine fitment still requires technical confirmation.
G-3/L-3 is listed as a radial G-3/L-3 range with 2 sizes and 4 recorded configurations.
The catalogue associates this range with Snow loader, Loader, Mining equipment. Its current site filters place it under earthmoving, construction, mining conditions.
17.5R25: 2-star, rim 14.00/1.5, 1348 mm overall diameter, 445 mm section width. 20.5R25: 2-star, rim 17.00/2.0, 1493 mm overall diameter, 521 mm section width.
Buyer questions
The catalogue associates this tyre with Snow loader and Loader and Mining equipment. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.
The current catalogue lists 17.5R25, 20.5R25. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.
G-3/L-3 identifies the L3-G9 catalogue tread family. It is a starting point; it does not replace machine and duty-cycle verification.
Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.
Continue with the radial vs bias OTR tyre duty-cycle guide →
Continue the comparison
Application check