Earthmoving · Radial
Radial 14.00R25 Earthmoving Tyre
Radial 14.00R25 earthmoving range offering E3/L3 and E4/L4 tread-class options for traction, stability and wear resistance.
Series overview
Radial 14.00R25 Earthmoving Tyre application and fit
This radial OTR tyre range is catalogued for earthmoving and special off-road duty. The current range focuses on earthmoving applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.
What the E3/L3 · E4/L4 designation tells buyers
The E3/L3 · E4/L4 designation identifies the L3-G9 catalogue tread family. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.
Operating conditions to confirm
For this range, document mixed site surfaces and the machine's actual travel cycle. JABIL uses those inputs to verify machine fitment, position, load, speed and surface before selection. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.
Technical data
Radial 14.00R25 Earthmoving Tyre available configurations
Blank values require technical confirmation. Load and pressure values are shown at their stated speeds and must not be interchanged.
| Size | Star rating | Type | TRA code | Standard rim | Tread depth mm | Load index | Width mm | OD mm | Max load / pressure by speed |
|---|---|---|---|---|---|---|---|---|---|
| 14.00R25 | Confirm | Confirm | E3/L3 · E4/L4 | Confirm | Confirm | Confirm | Confirm | Confirm | Confirm |
Buyer questions
Frequently asked questions about Radial 14.00R25 Earthmoving Tyre
What equipment is the Radial 14.00R25 Earthmoving Tyre intended for?
The catalogue associates this tyre with Loader and Dozer. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.
Which sizes are listed for the Radial 14.00R25 Earthmoving Tyre?
The current catalogue lists 14.00R25. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.
What does E3/L3 · E4/L4 mean on this page?
E3/L3 · E4/L4 identifies the L3-G9 catalogue tread family. It is a starting point; it does not replace machine and duty-cycle verification.
What information is needed to request a quotation?
Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.
For a worked example of the data required before quotation, read the 29.5-25 mining tyre selection guide →
Continue the comparison
Related tyres and application records
Application check