Application-engineered OTR tyre supplyInfo@jabiltyre.com
JABIL OTR TYRERequest a quote

Mining · Radial

Radial E-3/L-3 Mining Tyre

Non-directional radial E-3/L-3 tyre for mining, off-road and muddy surfaces with a low-heat tread compound.

Last reviewed: October 2026

E-3/L-32 sizes2 configurations

Series overview

Radial E-3/L-3 Mining Tyre application and fit

This radial OTR tyre range is catalogued for mining and heavy earthmoving duty. The current range focuses on mining applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.

What the E-3/L-3 designation tells buyers

The E-3/L-3 designation identifies the earthmover or mining tread family recorded in the catalogue. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.

Operating conditions to confirm

For this range, document haul-road surface, gradients, rock exposure and cycle heat. JABIL uses those inputs to review load, maximum speed, one-way haul distance, cycle time and common tyre failures. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.

Technical data

Radial E-3/L-3 Mining Tyre available configurations

TBC means the value is not present in the current source catalogue and must be verified before quotation. Load and pressure values are shown only at their stated speeds and must not be interchanged.

SizeStar ratingTypeTRA codeStandard rimTread depth mmLoad indexWidth mmOD mmMax load / pressure by speed
26.5R25★★TLE-3/L-322.00/3.038.5193B/209A2673175050 km/h: 11500 kg / 525 kPa; 10 km/h: 18500 kg / 650 kPa
29.5R25★★TLE-3/L-325.00/3.543200B/216A2749187450 km/h: 14000 kg / 525 kPa; 10 km/h: 22400 kg / 650 kPa

Catalogue evidence

Verified range data for E-3/L-3

These statements use only the published product dataset; final machine fitment still requires technical confirmation.

RANGE IDENTITY

Construction and scope

E-3/L-3 is listed as a radial E-3/L-3 range with 2 sizes and 2 recorded configurations.

APPLICATION DATA

Equipment context

The catalogue associates this range with Rigid dump truck, Loader. Its current site filters place it under mining, earthmoving conditions.

REPRESENTATIVE DATA

Recorded configurations

26.5R25: 2-star, rim 22.00/3.0, 1750 mm overall diameter, 673 mm section width. 29.5R25: 2-star, rim 25.00/3.5, 1874 mm overall diameter, 749 mm section width.

Buyer questions

Frequently asked questions about Radial E-3/L-3 Mining Tyre

What equipment is the Radial E-3/L-3 Mining Tyre intended for?

The catalogue associates this tyre with Rigid dump truck and Loader. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.

Which sizes are listed for the Radial E-3/L-3 Mining Tyre?

The current catalogue lists 26.5R25, 29.5R25. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.

What does E-3/L-3 mean on this page?

E-3/L-3 identifies the earthmover or mining tread family recorded in the catalogue. It is a starting point; it does not replace machine and duty-cycle verification.

What information is needed to request a quotation?

Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.

Application check

Need this pattern for a specific machine?

Send operating data