Mining · Radial
Radial L-5 Rock Service Tyre
Extra-deep radial L-5 tyre for loaders and dozers on extremely rocky surfaces in open pits, quarries and underground mines.
Series overview
Radial L-5 Rock Service Tyre application and fit
This radial OTR tyre range is catalogued for mining and heavy earthmoving duty. The current range focuses on mining applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.
What the L-5 designation tells buyers
The L-5 designation identifies the earthmover or mining tread family recorded in the catalogue. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.
Operating conditions to confirm
For this range, document haul-road surface, gradients, rock exposure and cycle heat. JABIL uses those inputs to review load, maximum speed, one-way haul distance, cycle time and common tyre failures. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.
Technical data
Radial L-5 Rock Service Tyre available configurations
Blank values require technical confirmation. Load and pressure values are shown at their stated speeds and must not be interchanged.
| Size | Star rating | Type | TRA code | Standard rim | Tread depth mm | Load index | Width mm | OD mm | Max load / pressure by speed |
|---|---|---|---|---|---|---|---|---|---|
| 17.5R25 | ★★★ | TL | L-5 | 14.00/1.5 | 64 | 193A2 | 445 | 1399 | 50 km/h: 11500 kg / 750 kPa |
| 20.5R25 | ★★ | TL | L-5 | 17.00/2.0 | 68 | 198A2 | 521 | 1548 | 50 km/h: 11500 kg / 650 kPa |
| 23.5R25 | ★★ | TL | L-5 | 19.50/2.5 | 78 | 201A2 | 597 | 1673 | 50 km/h G8: 14500 kg / 800 kPa |
| 26.5R25 | ★★ | TL | L-5 | 22.00/3.0 | 88 | 209A2 | 673 | 1798 | 50 km/h: 18500 kg / 650 kPa |
| 29.5R25 | ★★ | TL | L-5 | 25.00/3.5 | 95 | 216A2 | 749 | 1921 | 50 km/h: 22400 kg / 650 kPa |
| 35/65R33 | ★★ | TL | L-5 | 28.00/3.5 | 95 | 223A2 | 890 | 2075 | 50 km/h ETRTO: 27230 kg / 850 kPa |
Buyer questions
Frequently asked questions about Radial L-5 Rock Service Tyre
What equipment is the Radial L-5 Rock Service Tyre intended for?
The catalogue associates this tyre with Loader and Dozer. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.
Which sizes are listed for the Radial L-5 Rock Service Tyre?
The current catalogue lists 17.5R25, 20.5R25, 23.5R25, 26.5R25, 29.5R25, 35/65R33. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.
What does L-5 mean on this page?
L-5 identifies the earthmover or mining tread family recorded in the catalogue. It is a starting point; it does not replace machine and duty-cycle verification.
What information is needed to request a quotation?
Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.
For a worked example of the data required before quotation, read the 29.5-25 mining tyre selection guide →
Continue the comparison
Related tyres and application records
Application check