Construction and scope
E-2 is listed as a radial E-2 range with 3 sizes and 3 recorded configurations.
Off-road · Radial
Radial E-2 transport tyre for mining, quarry, on-road and construction-equipment transport.
Last reviewed: October 2026

Series overview
This radial OTR tyre range is catalogued for off-road vehicle operation on mixed terrain. The current range focuses on off-road applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.
The E-2 designation identifies the E-2 off-road catalogue family. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.
For this range, document soft ground, unpaved roads and transitions between surfaces. JABIL uses those inputs to confirm vehicle, axle position, load, speed, rim and inflation requirement. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.
Priority range guidance
This range is positioned for mining, quarry and construction transport that alternates between formed roads and off-highway site sections. Its three catalogue configurations cover 385/95R25, 385/95R24 and 16.00R25.
Use this page when route transitions, site access and intermittent off-road exposure are the defining inputs. Record the percentage of the cycle on each surface, loaded and empty speeds, gradients and current removal cause.
Compare related E-2 ranges: E-2 long-haul range · E-2 mixed-service range
Technical data
TBC means the value is not present in the current source catalogue and must be verified before quotation. Load and pressure values are shown only at their stated speeds and must not be interchanged.
| Size | Star rating | Type | TRA code | Standard rim | Tread depth mm | Load index | Width mm | OD mm | Max load / pressure by speed |
|---|---|---|---|---|---|---|---|---|---|
| 385/95R25 | ★★★ | TT/TL | E-2 | 10.00/2.0 | 23 | 170E | 375 | 1368 | 70 km/h: 6000 kg / 900 kPa |
| 385/95R24 | ★★★ | TT/TL | E-2 | 10.00/2.0 | 23 | 170F | 375 | 1368 | 80 km/h: 6000 kg / 900 kPa |
| 16.00R25 | ★★★ | TL | E-2 | 11.25/2.0 | 25 | 177E | 432 | 1493 | 70 km/h: 7300 kg / 900 kPa |
Catalogue evidence
These statements use only the published product dataset; final machine fitment still requires technical confirmation.
E-2 is listed as a radial E-2 range with 3 sizes and 3 recorded configurations.
The catalogue associates this range with Dump truck, Construction-equipment transporter. Its current site filters place it under construction, earthmoving, desert-offroad conditions.
385/95R25: 3-star, rim 10.00/2.0, 1368 mm overall diameter, 375 mm section width. 16.00R25: 3-star, rim 11.25/2.0, 1493 mm overall diameter, 432 mm section width.
Buyer questions
The catalogue associates this tyre with Dump truck and Construction-equipment transporter. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.
The current catalogue lists 385/95R25, 385/95R24, 16.00R25. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.
E-2 identifies the E-2 off-road catalogue family. It is a starting point; it does not replace machine and duty-cycle verification.
Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.
Continue with the radial vs bias OTR tyre duty-cycle guide →
Continue the comparison
Application check