Application-engineered OTR tyre supplyInfo@jabiltyre.com
JABIL OTR TYRERequest a quote

Off-road · Radial

Radial E-2 Long-Haul OTR Tyre

Radial E-2 tyre for high-speed long-haul, construction-site and heavy-equipment transport with traction on mixed surfaces.

Last reviewed: October 2026

E-26 sizes6 configurations

Series overview

Radial E-2 Long-Haul OTR Tyre application and fit

This radial OTR tyre range is catalogued for off-road vehicle operation on mixed terrain. The current range focuses on off-road applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.

What the E-2 designation tells buyers

The E-2 designation identifies the E-2 off-road catalogue family. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.

Operating conditions to confirm

For this range, document soft ground, unpaved roads and transitions between surfaces. JABIL uses those inputs to confirm vehicle, axle position, load, speed, rim and inflation requirement. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.

Priority range guidance

E-2 long-haul positioning

This range is the broadest of the three E-2 transport groups and is positioned for dump trucks, construction transport and heavy-equipment transporters where sustained travel is part of the cycle. Its six catalogue configurations include 14.00R24, 385/95R24, 14.00R25, 385/95R25, 16.00R25 and 445/95R25.

Use this page when speed, route length and repeated travel are primary selection inputs. Compare the exact load index, speed condition, rim and inflation data rather than treating every E-2 tyre as interchangeable.

Compare related E-2 ranges: E-2 mixed-service range · E-2 on/off-road range

Technical data

Radial E-2 Long-Haul OTR Tyre available configurations

TBC means the value is not present in the current source catalogue and must be verified before quotation. Load and pressure values are shown only at their stated speeds and must not be interchanged.

SizeStar ratingTypeTRA codeStandard rimTread depth mmLoad indexWidth mmOD mmMax load / pressure by speed
14.00R24★★★TLE-210.00W23170E375136870 km/h: 6000 kg / 900 kPa
385/95R24★★★TLE-210.00W23170F375136880 km/h: 6000 kg / 900 kPa
14.00R25★★★TLE-210.00/1.5 10.00/2.023170E375136870 km/h: 6000 kg / 900 kPa
385/95R25★★★TLE-210.00/1.5 10.00/2.023170F375136880 km/h: 6000 kg / 900 kPa
16.00R25★★★TLE-211.25/2.025177E432149370 km/h: 7300 kg / 900 kPa
445/95R25★★★TLE-211.25/2.025174F432149380 km/h: 6700 kg / 900 kPa

Catalogue evidence

Verified range data for E-2

These statements use only the published product dataset; final machine fitment still requires technical confirmation.

RANGE IDENTITY

Construction and scope

E-2 is listed as a radial E-2 range with 6 sizes and 6 recorded configurations.

APPLICATION DATA

Equipment context

The catalogue associates this range with Dump truck, Construction transport, Heavy-equipment transporter. Its current site filters place it under construction, earthmoving, desert-offroad conditions.

REPRESENTATIVE DATA

Recorded configurations

14.00R24: 3-star, rim 10.00W, 1368 mm overall diameter, 375 mm section width. 445/95R25: 3-star, rim 11.25/2.0, 1493 mm overall diameter, 432 mm section width.

Buyer questions

Frequently asked questions about Radial E-2 Long-Haul OTR Tyre

What equipment is the Radial E-2 Long-Haul OTR Tyre intended for?

The catalogue associates this tyre with Dump truck and Construction transport and Heavy-equipment transporter. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.

Which sizes are listed for the Radial E-2 Long-Haul OTR Tyre?

The current catalogue lists 14.00R24, 385/95R24, 14.00R25, 385/95R25, 16.00R25, 445/95R25. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.

What does E-2 mean on this page?

E-2 identifies the E-2 off-road catalogue family. It is a starting point; it does not replace machine and duty-cycle verification.

What information is needed to request a quotation?

Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.

Application check

Need this pattern for a specific machine?

Send operating data