Construction and scope
E-2 is listed as a radial E-2 range with 2 sizes and 2 recorded configurations.
Off-road · Radial
Radial E-2 mixed-service tyre developed for on-road and off-highway transport, operator comfort and casing durability.
Last reviewed: October 2026

Series overview
This radial OTR tyre range is catalogued for off-road vehicle operation on mixed terrain. The current range focuses on off-road applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.
The E-2 designation identifies the E-2 off-road catalogue family. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.
For this range, document soft ground, unpaved roads and transitions between surfaces. JABIL uses those inputs to confirm vehicle, axle position, load, speed, rim and inflation requirement. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.
Priority range guidance
This focused two-size group is positioned for dump trucks and construction-equipment transporters moving between paved access and off-highway surfaces. The catalogue records 16.00R25 and 445/95R25 configurations rather than the broader size spread on the long-haul page.
Use this page when the route changes between road and worksite conditions. Confirm how much time is spent on each surface, along with maximum speed, axle load and the approved 11.25/2.0 rim before comparing specifications.
Compare related E-2 ranges: E-2 long-haul range · E-2 on/off-road range
Technical data
TBC means the value is not present in the current source catalogue and must be verified before quotation. Load and pressure values are shown only at their stated speeds and must not be interchanged.
| Size | Star rating | Type | TRA code | Standard rim | Tread depth mm | Load index | Width mm | OD mm | Max load / pressure by speed |
|---|---|---|---|---|---|---|---|---|---|
| 16.00R25 | ★★★ | TL | E-2 | 11.25/2.0 | 23 | 177E | 432 | 1493 | 70 km/h: 7300 kg / 900 kPa |
| 445/95R25 | ★★★ | TL | E-2 | 11.25/2.0 | 23 | 174F | 432 | 1493 | 80 km/h: 6700 kg / 900 kPa |
Catalogue evidence
These statements use only the published product dataset; final machine fitment still requires technical confirmation.
E-2 is listed as a radial E-2 range with 2 sizes and 2 recorded configurations.
The catalogue associates this range with Dump truck, Construction-equipment transporter. Its current site filters place it under construction, earthmoving, desert-offroad conditions.
16.00R25: 3-star, rim 11.25/2.0, 1493 mm overall diameter, 432 mm section width. 445/95R25: 3-star, rim 11.25/2.0, 1493 mm overall diameter, 432 mm section width.
Buyer questions
The catalogue associates this tyre with Dump truck and Construction-equipment transporter. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.
The current catalogue lists 16.00R25, 445/95R25. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.
E-2 identifies the E-2 off-road catalogue family. It is a starting point; it does not replace machine and duty-cycle verification.
Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.
Continue with the radial vs bias OTR tyre duty-cycle guide →
Continue the comparison
Application check