Application-engineered OTR tyre supplyInfo@jabiltyre.com
JABIL OTR TYRERequest a quote

Scraper · Bias

L-3S Scraper Tyre

L-3S Scraper Tyre range for scraper and construction applications. Selection must be confirmed against load, speed, duty cycle and site conditions.

Last reviewed: October 2026

L-3S3 sizes3 configurations

Series overview

L-3S Scraper Tyre application and fit

This bias OTR tyre range is catalogued for scraper loading, haul and discharge cycles. The current range focuses on scraper and construction duty in the listed compact sizes. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.

What the L-3S designation tells buyers

The L-3S designation identifies the scraper-oriented tread family in the current catalogue. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.

Operating conditions to confirm

For this range, document haul-road condition, cycle length and cut exposure. JABIL uses those inputs to check scraper position, loaded speed, haul distance and heat-producing cycle time. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.

Technical data

L-3S Scraper Tyre available configurations

TBC means the value is not present in the current source catalogue and must be verified before quotation. Load and pressure values are shown only at their stated speeds and must not be interchanged.

SizePRStandard rimOD mmWidth mmLoad 10 km/h kgLoad 50 km/h kgPressure 10 km/h kPa40HQ pcs
10.00-20167.510552783260—670270
9.00-2014710152554375—725310
9.75-181669752501700—500280

Catalogue evidence

Verified range data for L-3S

These statements use only the published product dataset; final machine fitment still requires technical confirmation.

RANGE IDENTITY

Construction and scope

L-3S is listed as a bias L-3S range with 3 sizes and 3 recorded configurations.

APPLICATION DATA

Equipment context

The catalogue associates this range with Scraper, Construction. Its current site filters place it under construction, earthmoving conditions.

REPRESENTATIVE DATA

Recorded configurations

10.00-20: 16 PR, rim 7.5, 1055 mm overall diameter, 278 mm section width. 9.75-18: 16 PR, rim 6, 975 mm overall diameter, 250 mm section width.

Buyer questions

Frequently asked questions about L-3S Scraper Tyre

What equipment is the L-3S Scraper Tyre intended for?

The catalogue associates this tyre with Scraper and Construction. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.

Which sizes are listed for the L-3S Scraper Tyre?

The current catalogue lists 10.00-20, 9.00-20, 9.75-18. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.

What does L-3S mean on this page?

L-3S identifies the scraper-oriented tread family in the current catalogue. It is a starting point; it does not replace machine and duty-cycle verification.

What information is needed to request a quotation?

Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.

Continue the comparison

Related tyres and application records

View all OTR tyres →

Application check

Need this pattern for a specific machine?

Send operating data