Construction and scope
E-4 is listed as a radial E-4 range with 3 sizes and 5 recorded configurations.
Mining · Radial
Deep-tread radial E-4 tyre for severe rocky surfaces in underground mines, open pits and quarries.
Last reviewed: October 2026

Series overview
This radial OTR tyre range is catalogued for mining and heavy earthmoving duty. The current range focuses on mining applications. Selection starts with the listed size and pattern, then requires a check of the actual machine and operating cycle.
The E-4 designation identifies the earthmover or mining tread family recorded in the catalogue. Compare it with the present tyre marking and equipment requirement. A matching code or size alone does not confirm fitment, load capacity or expected service life.
For this range, document haul-road surface, gradients, rock exposure and cycle heat. JABIL uses those inputs to review load, maximum speed, one-way haul distance, cycle time and common tyre failures. Current tyre photos and a description of cuts, heat, wear or other failures help focus the review.
Priority range guidance
This E-4 group covers 18.00R33, 21.00R35 and 24.00R35 configurations for rigid dump trucks and underground mining equipment. The published rows differ in star rating, load index and inflation data, so the complete configuration must be selected—not the size alone.
Use this page for large-rim mining and quarry enquiries where rock exposure, route severity, loaded speed and heat-producing cycle time are documented. Final fitment requires the exact truck, wheel position and rim.
Technical data
TBC means the value is not present in the current source catalogue and must be verified before quotation. Load and pressure values are shown only at their stated speeds and must not be interchanged.
| Size | Star rating | Type | TRA code | Standard rim | Tread depth mm | Load index | Width mm | OD mm | Max load / pressure by speed |
|---|---|---|---|---|---|---|---|---|---|
| 18.00R33 | ★★ | TL | E-4 | 13.00/2.5 | 49 | 191B | 500 | 1875 | 50 km/h: 10900 kg / 700 kPa |
| 18.00R33 | ★★★ | TL | E-4 | 13.00/2.5 | 49 | 196B | 500 | 1875 | 50 km/h: 12500 kg / 900 kPa |
| 21.00R35 | ★★ | TL | E-4 | 15.00/3.0 | 53 | 201B | 555 | 2040 | 50 km/h: 14500 kg / 700 kPa |
| 24.00R35 | ★★ | TL | E-4 | 17.00/3.5 | 58 | 209B | 655 | 2175 | 50 km/h: 18500 kg / 700 kPa |
| 24.00R35 | ★★★ | TL | E-4 | 17.00/3.5 | 58 | 214B | 655 | 2175 | 50 km/h: 21200 kg / 900 kPa |
Catalogue evidence
These statements use only the published product dataset; final machine fitment still requires technical confirmation.
E-4 is listed as a radial E-4 range with 3 sizes and 5 recorded configurations.
The catalogue associates this range with Rigid dump truck, Underground mining equipment. Its current site filters place it under mining, quarry conditions.
18.00R33: 2-star, rim 13.00/2.5, 1875 mm overall diameter, 500 mm section width. 24.00R35: 3-star, rim 17.00/3.5, 2175 mm overall diameter, 655 mm section width.
Buyer questions
The catalogue associates this tyre with Rigid dump truck and Underground mining equipment. Final suitability depends on the machine model, tyre position, load, speed, rim and operating conditions.
The current catalogue lists 18.00R33, 21.00R35, 24.00R35. Use the technical table to compare PR, standard rim, dimensions, load, pressure and container quantity where verified.
E-4 identifies the earthmover or mining tread family recorded in the catalogue. It is a starting point; it does not replace machine and duty-cycle verification.
Provide the tyre size, machine model, tyre position, load, maximum speed, daily hours, haul distance or cycle time, road condition, current failure mode, quantity and destination.
Continue with the radial vs bias OTR tyre duty-cycle guide →
Continue the comparison
Application check